Table Of Contents
6.1.12 Trigger Initiate 2323
6.1.13 Source Sync 2323
6.1.13.1 Sync Config 2323
6.1.13.2 Sync Type 2324
6.1.13.3 Sync Settings 2325
Secondary Module List 2325
Sync Settings 2326
Sync Segment 2 2327
Segment 2 Frequency 2327
IP Address 2328
SCPI Socket Port 2328
Add Secondary Module 2328
Delete Secondary Module 2328
Sync Runtime Settings (Remote Command Only) 2329
6.1.13.4 Sync Start 2329
6.1.13.5 Sync Stop 2329
6.1.13.6 Sync Connected (Remote Query Only) 2330
6.1.14 Source Preset 2330
6.2 Input 2331
6.2.1 Select Input 2331
6.2.2 RF Input Port 2340
6.2.3 SA Frequency Extender Firmware Update (Front Panel Only) 2350
6.2.4 SA Frequency Extender Cable Correction 2351
6.2.5 Half Duplex Input Port 2351
6.2.6 Port Information (Remote Command Only) 2352
6.2.7 RF Preselector 2352
6.2.8 Notch Filter 2354
6.2.9 RF Calibrator 2354
6.2.10 RF Coupling 2355
6.2.11 Input Z Correction 2357
6.2.12 All Screens Use Same Input 2358
6.2.13 External Mixer Setup 2358
6.2.13.1 Mixer Presets 2362
6.2.13.2 Mixer Bias 2367
6.2.13.3 Table Type 2368
6.2.13.4 Select VDI CCD Correction 2369
62 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
