Table Of Contents
6.5.13.3 Delete Row 2443
6.5.13.4 Select File 2443
6.5.13.5 Specify File 2443
6.5.13.6 Remove File 2443
6.5.13.7 Correction Trace Display 2443
6.5.13.8 Description 2444
6.5.13.9 Comment 2444
6.5.13.10 Start Frequency 2444
6.5.13.11 Stop Frequency 2445
6.5.14 Merge Correction Data (Remote Command Only) 2445
6.5.15 Set (Replace) Data (Remote Command Only) 2446
6.5.16 Correction Group Range Data (Remote Command Only) 2446
6.5.17 Delete Correction Group Range (Remote Command Only) 2447
6.6 Freq Ref Input 2448
6.6.1 Freq Ref Input 2448
6.6.2 Ext Ref Freq 2453
6.6.3 Default External Ref Freq 2454
6.6.4 LO Ref Input 2454
6.6.5 Ref Lock BW 2455
6.6.6 Reference Oscillator On/Off (Remote Command Only) 2456
6.6.6.1 Select Ref 2456
6.6.6.2 Freq Ref In 2457
6.6.6.3 External Freq Ref 2457
6.6.6.4 Ext Ref Locked (Remote Query Only) 2457
6.7 Output 2459
6.7.1 Analog Out 2459
6.7.2 Screen Video Level 2463
6.7.3 Digital Bus Out 2464
6.7.4 Wideband Digital Bus 2464
6.7.5 Data Stream 2467
6.7.6 I/Q Cal Out 2467
6.7.7 Aux IF Out 2468
6.7.8 Arbitrary IF Freq 2470
66 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
