Keysight x-series - Page 67

Table Of Contents
6.7.9 Ext/Wide IF Out 2470
6.7.10 IF2 Out 2471
6.7.11 REF Out 2472
6.7.12 LO Ref Out 2472
6.8 Trigger Output 2474
6.8.1 Trig 1 – 4 Out 2474
6.8.2 Trig 1 – 4 Out Polarity 2476
6.8.3 Trig 1 – 4 Out Device 2477
6.8.4 Src PXI Trig Out 2477
6.8.5 Src Trig Out Polarity 2478
6.8.6 Select Src PXI Line 2478
6.8.7 Analyzer PXI Trig Out 2479
6.8.8 Analyzer Trig Out Polarity 2480
6.8.9 Select Analyzer PXI Line 2480
6.8.10 Source Internal Trig Out 2480
6.8.11 Source Internal Trig Out Polarity 2481
6.9 Calibration 2483
6.9.1 Configuration 2483
6.9.1.1 Cal Group 2485
6.9.1.2 Calibrate Checked Rows 2485
6.9.1.3 Apply Cal Group 2486
6.9.1.4 Abort Calibration 2486
6.9.1.5 Copy From Cal Group 2487
6.9.1.6 Copy 2487
6.9.1.7 Cal Input 2488
6.9.1.8 Freq Offset 2488
6.9.1.9 Select Calibrator 2489
6.9.1.10 Identify RCal Module 2489
6.9.1.11 RCal Module Serial Number (Remote Query Only) 2489
6.9.1.12 RCal Reference 2489
6.9.1.13 RCal Status 2490
RCal Status (Remote Query Only) 2491
All RCal Status (Remote Query Only) 2491
6.9.1.14 Go to Row 2491
Spectrum Analyzer Mode User's &Programmer's Reference 67