Keysight x-series User Manual

Table Of Contents
7.3.14.3 Mass Storage Copy (Remote Command Only) 2624
7.3.14.4 Mass Storage Device Copy (Remote Command Only) 2624
7.3.14.5 Mass Storage Delete (Remote Command Only) 2625
7.3.14.6 Mass Storage Data (Remote Command Only) 2625
7.3.14.7 Mass Storage Make Directory (Remote Command Only) 2625
7.3.14.8 Mass Storage Move (Remote Command Only) 2625
7.3.14.9 Mass Storage Remove Directory (Remote Command Only) 2626
7.3.14.10 Mass Storage Determine Removable Media (Remote Query
Only) 2626
7.3.14.11 Mass Storage Determine Removable Media Label (Remote
Command Only) 2626
7.3.14.12 Mass Storage Determine Removable Media Write-protect
status (Remote Query Only) 2627
7.3.14.13 Mass Storage Determine Removable Media size (Remote
Query Only) 2627
7.3.14.14 :SYSTem:SET (Remote Command Only) 2627
7.4 Print 2629
7.5 Page Setup 2630
8 Trigger 2632
8.1 Trigger 2633
8.1.1 Select Trig Source 2633
8.1.1.1 Free Run 2646
8.1.1.2 Video/ADC 2646
8.1.1.3 ADC Trigger 2647
8.1.1.4 Line 2648
8.1.1.5 External 1 2648
8.1.1.6 External 2 2649
8.1.1.7 External 3 2649
8.1.1.8 Audio External 2650
8.1.1.9 RF Burst 2651
8.1.1.10 Periodic 2652
8.1.1.11 TV 2654
8.1.1.12 I/Q Mag 2655
72 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)