Keysight x-series User Manual

Table Of Contents
8.1.1.13 Input I 2656
8.1.1.14 Input Q 2656
8.1.1.15 I (Demodulated) 2657
8.1.1.16 Q (Demodulated) 2657
8.1.1.17 Aux I/Q Mag 2658
8.1.1.18 PXI 2658
8.1.1.19 Internal 2659
8.1.1.20 Prot Channel Detection 2659
8.1.1.21 Prot Frame Aligned 2660
8.1.1.22 Prot Event 2660
8.1.2 Trigger Level 2661
8.1.3 Trigger Delay 2663
8.1.4 Trigger Slope 2667
8.1.5 Trigger Level Absolute/Relative 2668
8.1.6 Absolute Trigger Level 2668
8.1.7 Relative Trigger Level 2669
8.1.8 Period 2671
8.1.9 Offset 2671
8.1.10 Reset Offset Display 2672
8.1.11 Offset Adjust (Remote Command Only) 2673
8.1.12 Sync Source 2673
8.1.13 TV Line 2674
8.1.14 Field 2675
8.1.15 Standard 2675
8.1.16 Trigger Center Frequency 2676
8.1.17 Trigger BW 2676
8.1.18 X Axis Relative to Trigger 2677
8.1.19 Zero Span Delay Compensation On/Off 2678
8.1.20 Select PXI Line 2679
8.1.21 Reset Sync Monitor 2679
8.1.22 Trigger Optimization 2680
8.1.23 Trigger Settings Diagram 2681
8.2 Gate Source 2682
Spectrum Analyzer Mode User's &Programmer's Reference 73

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)