Keysight x-series User Manual

Table Of Contents
8.2.1 Select Gate Source 2682
8.2.2 Sync Holdoff 2683
8.3 Gate Settings 2685
8.3.1 Gate On/Off 2685
8.3.2 Gate View On/Off 2686
8.3.3 Gate Delay 2688
8.3.4 Gate Length 2689
8.3.5 Gate Method 2690
8.3.6 Control Edge/Level 2691
8.3.7 Gate Holdoff 2692
8.3.8 Gate View Sweep Time 2693
8.3.9 Gate View Start Time 2694
8.3.10 Gate Delay Compensation 2695
8.3.11 Min Fast Position Query (Remote Query Only) 2696
8.3.12 Gate Preset (Remote Command Only) 2697
8.3.13 Gate Level (Remote Command Only) 2697
8.3.14 Gate Polarity (Remote Command Only) 2697
8.4 Enables the hardware accelerated stepped FFT gating feature
(Display only) 2699
8.5 Periodic Sync Src 2700
8.5.1 Select Periodic Timer Sync Source 2700
8.6 Auto/Holdoff 2701
8.6.1 Trig Holdoff 2701
8.6.2 Auto Trig 2701
8.6.3 Holdoff Type 2702
9 Programming the Instrument 2704
9.1 List of Supported SCPI Commands 2705
* 2705
A 2705
C 2705
D 2713
F 2716
H 2717
74 Spectrum Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)