ADSP-21368 SHARC Processor Hardware Reference A-1
A REGISTER REFERENCE
The ADSP-21367/8/9 and ADSP-2137x processors have general-purpose
and dedicated registers in each of their functional blocks. The register ref-
erence information for each functional block includes bit definitions,
initialization values, and memory-mapped addresses (for I/O processor
registers). Information on each type of register is available at the following
locations:
• “I/O Processor Registers” on page A-2
• “External Port Registers” on page A-10
• “Serial Port Registers” on page A-29
• “Serial Peripheral Interface Registers” on page A-52
• “Input Data Port Registers” on page A-65
• “Pulse Width Modulation Registers” on page A-78
• “Sample Rate Converter Registers” on page A-97
• “Sony/Philips Digital Interface Registers” on page A-86
• “DAI/DPI Registers” on page A-109
• “UART Control and Status Registers” on page A-118
• “Two Wire Interface Registers” on page A-130
• “Precision Clock Generator Registers” on page A-155
• “Peripheral Interrupt Priority Control Registers” on page A-164
To Next Page
Loading...
