January 2007
2-78
WorkCentre 7132
005-151, 005-152
Revision
Status-indicator-raps
005-151 CVT Holed Paper Pre Reg Sensor Off Jam
BSD-ON:5.4
Pre Reg Sensor does not turn Off in specified time from Pre Reg Sensor On in holed document
mode.
Procedure
Ensure that a point on circumference (farthest from trail edge), not a center, of a hole on trail
edge side is 19mm or less from trail edge.
005-152 CVT Holed Paper Reg Sensor Off Jam
BSD-ON:5.4
Reg Sensor does not turn Off in specified time from Reg Sensor On in holed document mode.
Procedure
Ensure that a point on circumference (farthest from trail edge), not a center, of a hole on trail
edge side is 19mm or less from trail edge.
To Next Page
Loading...
