Xerox WorkCentre 7132

January 2007
2-732
WorkCentre 7132
093-971, 093-972
Revision
Status-indicator-raps
093-971 Toner M CRUM not in position Failure
BSD-ON:9.1
M Toner CRUM not in position Failure.
Initial Actions
• Ensure that the Magenta Toner Cartridge is seated correctly.
• Ensure that the Toner Cartridge Door is closed.
Procedure
Fault codes 093-916 (K), 093-970 (Y), and 093-972 (C) are also present on the UI.
YN
Replace the Magenta Toner Cartridge (PL 5.2).
Replace the Toner CRUM (Toner Cartridge Door) (PL 5.1).
If the fault codes are still present, replace the MCU PWB (PL 11.1).
093-972 Toner C CRUM not in position Failure
BSD-ON:9.1
C Toner CRUM not in position Failure.
Initial Actions
• Ensure that the Cyan Toner Cartridge is seated correctly.
• Ensure that the Toner Cartridge Door is closed.
Procedure
Fault codes 093-916 (K), 093-970 (Y), and 093-971 (M) are also present on the UI.
YN
Replace the Cyan Toner Cartridge (PL 5.2).
Replace the Toner CRUM (Toner Cartridge Door) (PL 5.1).
If the fault codes are still present, replace the MCU PWB (PL 11.1).