January 2007
2-48
WorkCentre 7132
003-956, 003-963
Revision
Status-indicator-raps
003-956 Coping from the Platen Failure RAP
When coping from the Platen a fault occurs. The DADF working OK.
Procedure
Check the APS Sensor for a bent, bond, or damaged actuator preventing the full range of
travel of the APS Sensor Actuator.
If the problem continues, replace the APS Sensor (PL 13.4).
003-963 APS Object Tray RAP
The correct size is not loaded for APS operation.
Procedure
Select a tray that supplies the required size paper and repeat the operation.
To Next Page
Loading...
