January 2007
2-855
WorkCentre 7132
124-393, 124-701
Status-indicator-raps
Revision
124-393 CRU OEM System 2 (2)
OEM (Original Equipment Manufacturer) CRUM control failed in system 2.
Procedure
Check the electrical connections on the ESS PWB and MCU PWB. The connectors are
securely connected.
YN
Connect the connectors.
Turn on the power again. The problem persists.
YN
Return to Service Call Procedures.
Perform GP 4, repair the problem by master SYS2.
If the problem persists, replace the ESS PWB (PL 11.2).
124-701 Side Tray to Center Tray RAP
The output destination was changed by the customer from the Side Tray to the Center Tray.
Procedure
No action necessary.
To Next Page
Loading...
Need help?
General
