January 2007
6-91
WorkCentre 7132
Controller & Fax NVM List
General procedures information
Reversion 4.0
Controller & Fax NVM List Chain 700-xxx Common
Table 1 Common
Chain-Link NVM Name
Setup
Range
Initial
Value
Read/Write Description
700-061 FAX Card Availability -2~0 - Read 0: Normal, -1: Error, -2: Not installed
700-064 Availability of Fax Card for Ch0
Installed by Host. (It is good that the Fax
Card performs only auto detection.)
0~1 0: Off Read/Write 0: OFF, 1: ON
700-071 USB Port Receive Buffer 64~1024 64KB Read/Write [64KB~1MB](32KB increments) Unit: Kbyte
700-073 Page Memory Size (Volume) - - Read bytes (Auto Setting)
700-075 ART User Definition Memory (Valid only
when the machine is installed with the
ART/Emulation option)
32~2048 32KB Read/Write [32KB~2048KB](32KB increments) Unit: Kbyte
700-076 PostScript Memory (Valid only when PS
option is installed)
8~96 24MB
(24*1024)
Read/Write [8MB~96MB](0.25MB increments) Unit: Kbyte
700-078 Form Data Memory (ART and ESC/P)
(Valid only when the machine is installed
with the ART/Emulation option and not
installed with the HDD.)
128~2048 128KB Read/Write [128KB~2048KB]Unit: Kbyte
700-080 HPGL/Auto Layout Memory (Valid only
when the machine is installed with the
ART/Emulation option and not installed
with the HDD.)
64~5120 64KB Read/Write [64KB~5120KB](32KB increments) Unit: Kbyte
700-081 Parallel (IEEE1284) Port 64~1024 64KB Read/Write [64KB~1MB](32KB increments) Unit: Kbyte
700-082 Port9100 Port 64~1024 256KB Read/Write [64KB~1MB](32KB increments) Unit: Kbyte
700-083 lpd: Spool Off 64~1024 256KB Read/Write [64KB~1MB](32KB increments) Unit: Kbyte
700-084 NetWare 64~1024 256KB Read/Write [64KB~1MB](32KB increments) Unit: Kbyte
700-085 AppleTalk (EtherTalk) 64~1024 256KB Read/Write [64KB~1MB](32KB increments) Unit: Kbyte
700-086 SMB: Spool Off 64~1024 256KB Read/Write [64KB~1MB](32KB increments) Unit: Kbyte
700-087 IPP: Spool Off 64~1024 256KB Read/Write [64KB~1MB](32KB increments) Unit: Kbyte
700-088 Salutation 64~1024 256KB Read/Write [64KB~1MB](32KB increments) Unit: Kbyte
700-089 HDD Availability -2~0 - Read 0: Yes, -1: Error, -2: No (Auto Detect)
700-100 Enable/Disable the Setting of Forced War-
mup Mode
0, 1 0: Cannot
be set
Read/Write 0: Cannot be set, 1: Can be set
700-109 Forced Warmup Mode 0, 1 0: Disable Read/Write 0: Disable, 1: Enable
700-110 Specify Start Time for Forced Warmup
(Hour)
0~23 8 (Hour) Read/Write 0-23 (Hour)
700-111 Specify Start Time for Forced Warmup
(Min)
0~59 0 (Min) Read/Write 0-59 (Min)