January 2007
2-201
WorkCentre 7132
016-510, 016-511
Status-indicator-raps
Revision
016-510 Image Log RAP
The Image Log block send command 2 in the HDD failed.
Initial Actions
Power Off/On
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power.
If the problem persists perform Hard Disk Diagnostic Program. If the problem persists perform
GP 6 Special Boot Modes HDD Initialization.
If the problem persists, replace the HDD (PL 11.2)
016-511 Image Log RAP
The Image Log invalid send rule 1 executed in the HD.
Initial Actions
Power Off/On
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power.
If the problem persists perform Hard Disk Diagnostic Program. If the problem persists perform
GP 6 Special Boot Modes HDD Initialization.
If the problem persists, replace the HDD (PL 11.2)
To Next Page
Loading...
Need help?
General
