January 2007
4-76
WorkCentre 7132
REP 10.3.1
Reversion 4.0
Repairs/Adjustments
REP 10.3.1 Rear Fan
Parts List on PL 11.1
Removal
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Switch off the power and disconnect the power cord.
2. Remove the ESS PWB (REP 9.2.1).
3. Remove the screw (A).
4. Unplug connector (B).
5. Remove the Rear Fan (Figure 1).
Figure 1 Rear Fan
Replacement
To install, carry out the removal steps in reverse order.
To Next Page
Loading...
