Xerox WorkCentre 7132

January 2007
2-102
WorkCentre 7132
005-903, 005-904
Revision
Status-indicator-raps
005-903 Belt DADF Exit Sensor Static Jam
Document at Exit Sensor at Power ON detected.
Procedure
If the problem occurs frequently, make sure that there is no obstacle blocking the light path on
Exit Sensor. Check the connections between the Exit Sensor and the DADF PWB. If OK,
replace the Exit Sensor. If the problem persists, replace the DADF PWB (PL 16.3).
005-904 Belt Dup Sensor Static Jam
Document at Dup Sensor at Power ON detected.
Procedure
If the problem occurs frequently, make sure that there is no obstacle blocking the light path on
Dup Sensor. Check the connections between the Dup Sensor and the DADF PWB. If OK,
replace the Dup Sensor. If the problem persists, replace the DADF PWB (PL 16.3).