EasyManuals Logo

Xerox WorkCentre 7132 Service Documentation

Xerox WorkCentre 7132
1726 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #443 background imageLoading...
Page #443 background image
January 2007
2-410
WorkCentre 7132
033-717, 033-718
Revision
Status-indicator-raps
033-717 Fax Control RAP
BSD-ON:16.1/17.1
Verification of the specified password failed.
Procedure
Perform following as required
1. Verify machine is connected to dedicated analog line (not ISDN).
2. Verify that no password is set.
Customer can perform following steps if system admin is accessible with code (five one’s)
11111, or code is available.
a. Press the Log In / Out Button on the Control Panel and enter (five one’s) 11111
using the number keypad and select Confirm.
b. Select System Settings.
c. Select System Settings again.
d. Select FAX Mode Settings.
e. Select Local Terminal Settings.
f. Check that 3. Machine Password is (not set).
If it is (not set), select close/exit as required. Go to step 3.
If a password is set, go to step g.
g. Select 3. Machine Password and select Change Settings.
h. Select Backspace as required to delete the password.
i. Select Save.
j. Select Close/Exit as required.
k. Select Close again.
l. Select Close again.
m. Power machine off and on to verify setting change.
3. Initialize NVM.
033-718 Fax Control RAP
BSD-ON:16.1/17.1
The document does not exist in the Polling Send box or the specified mailbox.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel the job and resend.

Table of Contents

Other manuals for Xerox WorkCentre 7132

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 7132 and is the answer not in the manual?

Xerox WorkCentre 7132 Specifications

General IconGeneral
BrandXerox
ModelWorkCentre 7132
CategoryAll in One Printer
LanguageEnglish

Related product manuals