EasyManuals Logo

Xerox WorkCentre 7132 Service Documentation

Xerox WorkCentre 7132
1726 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #350 background imageLoading...
Page #350 background image
January 2007
2-317
WorkCentre 7132
024-371, 024-372
Status-indicator-raps
Revision
024-371 IOT-ESS Communication 21 RAP
BSD-ON:3.1/16.1
When the Controller and IOT are turned On, a response from the IOT to a request to establish
communications was not detected within the specified time.
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists, reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).
If the problem persists, replace the MCU PWB (PL 11.1).
024-372 IOT-ESS Communication 22 RAP
BSD-ON:3.1/16.1
An illegal instruction for IOT Port number or time-out timing or the pointer or transfer size was
detected.
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists, reload Software (ADJ 9.3.1).
If the problem persists, replace the MCU PWB (PL 11.1) If the problem persists, replace the
ESS PWB (PL 11.2).

Table of Contents

Other manuals for Xerox WorkCentre 7132

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 7132 and is the answer not in the manual?

Xerox WorkCentre 7132 Specifications

General IconGeneral
BrandXerox
ModelWorkCentre 7132
CategoryAll in One Printer
LanguageEnglish

Related product manuals