Xerox WorkCentre 7132 Service Documentation

January 2007
2-22
WorkCentre 7132
003-320, 003-321
Revision
Status-indicator-raps
003-320 IISS-ESS Communication 1 RAP
BSD-ON:3.1/6.2
An abnormal parameter is set as the argument for the send function.
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
003-321 IISS-ESS Communication 2 RAP
BSD-ON:3.1/6.2
The ACK (acknowledgement code) could not be received after 2 resend attempts. (The
Sequencing No. of the sent Message Packet is incorrect.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English