Xerox WorkCentre 7132 Service Documentation

January 2007
6-198
WorkCentre 7132
Center Tray Offsetting, E-Mail Icon
Reversion 4.0
General procedures information
Center Tray Offsetting
This procedure enables offsetting in Center Tray.
Procedure
Customer can perform following steps if system admin is accessible with code (five one’s)
11111, or code is available.
1. Press the Log In / Out Button on the Control Panel and enter (five one’s) 11111 using the
number keypad and select Confirm.
2. Select System Settings.
3. Select System Settings again.
4. Select Common Settings.
5. Select Other Settings.
6. Select Offset Stacking and select Change Setting.
7. Select Offset per Set.
8. Select Save.
9. Select Close.
10. Select Close again.
11. Select Close again.
12. Select Exit. Power off and on if the setting is not active.
E-Mail Icon
This procedure restores E-Mail icon in display on machines with this capability.
Procedure
Customer can perform following steps if system admin is accessible with code (five one’s)
11111, or code is available.
1. Press the Log In / Out Button on the Control Panel and enter (five one’s) 11111 using the
number keypad and select Confirm.
2. Select System Settings.
3. Select System Settings again.
4. Select Network Settings.
5. Select Port Settings.
6. Select down arrow and scroll to Send E-mail.
7. Select Send E-mail and select Change Setting, twice.
8. Select Enabled and select Save.
9. Select Close.
10. Select Close again.
11. Select Close again.
12. Select Close again.
13. Select Exit. Power off and on if the setting is not active.

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English