January 2007
2-314
WorkCentre 7132
024-362, 024-363
Revision
Status-indicator-raps
024-362 Page Sync Start RAP
BSD-ON:3.1/16.1
During IOT output, before the output data was written to FIFO Full (first in first out), Page Sync
activated.
Initial Actions
Power Off/On
Procedure
Electrical noise on the power circuit for the machine may be excessive. Verify the ground con-
nections on the ESS Chassis.
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).
024-363 Page Sync Stop RAP
BSD-ON:3.1/16.1
During IOT output, before output in the specified size, Page Sync was disabled.
Initial Actions
Move away machines that are noisy.
Procedure
Electrical noise on the power circuit for the machine may be excessive. Verify the ground con-
nections on the ESS Chassis.
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).
To Next Page
Loading...
