EasyManua.ls Logo

Xerox WorkCentre 7132

Xerox WorkCentre 7132
1726 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
January 2007
2-200
WorkCentre 7132
016-508, 016-509
Revision
Status-indicator-raps
016-508 Image Log RAP
The Image Log send command 2 in the HDD failed.
Initial Actions
Power Off/On
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power.
If the problem persists perform Hard Disk Diagnostic Program. If the problem persists perform
GP 6 Special Boot Modes HDD Initialization.
If the problem persists, replace the HDD (PL 11.2)
016-509 Image Log RAP
The Image Log block send command 1 in the HDD failed.
Initial Actions
Power Off/On
Procedure
Switch off the power and disconnect and reconnect the electrical connectors in the ESS and
HD. Switch on the power.
If the problem persists perform Hard Disk Diagnostic Program. If the problem persists perform
GP 6 Special Boot Modes HDD Initialization.
If the problem persists, replace the HDD (PL 11.2)

Table of Contents

Other manuals for Xerox WorkCentre 7132

Related product manuals