EasyManua.ls Logo

Xerox WorkCentre 7132

Xerox WorkCentre 7132
1726 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
January 2007
2-30
WorkCentre 7132
003-336, 003-337
Revision
Status-indicator-raps
003-336 IISS-ESS Communication 17 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (After the header
was recognized, it was detected that receiving was aborted.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
003-337 IISS-ESS Communication 18 RAP
BSD-ON:3.1/6.2
After restoring from Power Saver mode, there was no response to the Power On command
sent to the IIT/IPS PWB within the specified time.
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).

Table of Contents

Other manuals for Xerox WorkCentre 7132

Related product manuals