January 2007
2-55
WorkCentre 7132
005-110, 005-111
Status-indicator-raps
Revision
005-110 Belt DADF Regi Sensor On Dynamic Jam RAP
BSD-ON:5.4
Registration Sensor does not turn On in specified time from start of original document feed.
Procedure
When the problem occurs frequently, check if there is any area in document path that interferes
with document feed. If OK, check connectors and wiring for damage. If the problem continues,
replace Registration Sensor (PL 16.7). If the problem persists, replace the DADF PWB (PL
16.3).
005-111 Belt DADF Regi Sensor Off Dynamic Jam RAP
BSD-ON:5.4
Registration Sensor does not turn Off in specified time from start of original document feed.
Procedure
When the problem occurs frequently, check if there is any area in document path that interferes
with document feed. If OK, check connectors and wiring for damage. If the problem continues,
replace Registration Sensor (PL 16.7). If the problem persists, replace the DADF PWB (PL
16.3).