January 2007
2-785
WorkCentre 7132
116-739, 116-740
Status-indicator-raps
Revision
116-739 Form/Logo Capacity RAP
Form/logo registration was not possible because of insufficient RAM disk or HDD capacity.
Initial Actions
Power Off/On
Procedure
Ask customer to check the registered forms/logos using the Operation Panel utility, delete the
forms/logos that are unnecessary.
Refer customer to User Guide heading Data Encryption to check RAM usage.
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 11.2).
116-740 Arithmetic RAP
The number calculated in the interpreter exceeded the limit value.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel and rerun the job.