Xerox WorkCentre 7132 Service Documentation

January 2007
4-195
WorkCentre 7132
REP 22.3.1
Repairs/Adjustments
Reversion 4.0
4. Remove the front Bearing. (Figure 2)
(1)Remove Bearing.
Figure 2 Removing the Bearing (j0fa42202)
5. Remove the rear Gear. (Figure 3)
(1)Remove E-Clip.
(2)Remove Gear.
Figure 3 Removing the Gear (j0fa42203)
6. Remove the rear Bearing. (Figure 4)
(1)Remove Bearing.
Figure 4 Removing the Bearing (j0fa42204)
7. Remove the Paddle Link Assembly. (Figure 5)
(1)Remove Paddle Link Assembly.
Figure 5 Removing the Paddle Link Assembly (j0fa42205)

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English