Xerox WorkCentre 7132 Service Documentation

January 2007
2-763
WorkCentre 7132
116-360, 116-361
Status-indicator-raps
Revision
116-360 SMB Software RAP
An internal shutdown occurred after a SMB (Server Message Block) processing error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 11.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).
116-361 Spool HDD RAP
The controller spool detected an error during HDD access.
Initial Actions
Power Off/On
Procedure
Check the HDD electrical connections (PL 11.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 9.2).

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English