January 2007
2-38
WorkCentre 7132
003-760, 003-761
Revision
Status-indicator-raps
003-760 Scan Settings RAP
BSD-ON:3.1/6.2
The job properties are incorrect.
Procedure
Ask customer to verify the setups.
If the problem persists disconnect and reconnect the IIT/IPS PWB Harness.
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
003-761 Incorrect Paper Tray Size RAP
The Cover Tray or the Transparency Tray size is incorrect when the Cover Content Tray or
Separator + N set Tray is selected in APS.
Procedure
The paper size in the tray selected by auto tray switching differs from the paper size in the tray
selected at the tray selection. Ask customer to either change the paper size for the tray, or
change the paper type priority setting.
To Next Page
Loading...
Need help?
General
