Xerox WorkCentre 7132 Service Documentation

January 2007
2-780
WorkCentre 7132
116-711 , 116-712
Revision
Status-indicator-raps
116-711 Size/Orientation Mismatch RAP
In overlay mode the PLW form is different from the size/orientation of the paper.
Procedure
Ask customer to check setups so that the paper is the same size and orientation as the overlay.
116-712 Form Registration RAP
Form/logo data registration is not possible due to insufficient RAM disk or HDD capacity.
Initial Actions
Power Off/On
Procedure
Ask customer to delete unused or unnecessary forms.
Perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 11.2).

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English