Xerox WorkCentre 7132

January 2007
4-157
WorkCentre 7132
REP 16.3.1, REP 16.4.1
Repairs/Adjustments
Reversion 4.0
Figure 5 Removing the H-Transport Belt
REP 16.4.1 Front Cover Assembly
Parts List on PL 17.4
Removal
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
CAUTION
Check that “Ready to Copy” is displayed on the Control Panel display.
1. Remove the Front Cover Assembly. (Figure 1)
1. Remove the screws (x4).
2. Remove the Front Cover Assembly.
Figure 1 Removing the Front Cover Assembly