Xerox WorkCentre 7132

January 2007
2-797
WorkCentre 7132
121-310, 121-333
Status-indicator-raps
Revision
121-310 EPSV-Accessory Communication HDD RAP
Transmission between the EP-SV and the accessories failed.
Initial Actions
Power Off/On
Procedure
Check the electrical connectors on the HDD (PL 11.2)
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the EP-SV.
If the problem persists install or replace the EPSV-IF board (PL 11.2).
If the problem persists replace the EP accessory.
121-333 EPSV-EP M/C Communication HDD RAP
Transmission between the EP-SV and the machine failed.
Initial Actions
Power Off/On
Procedure
Check the electrical connectors on the HDD (PL 11.2)
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists reinstall or replace the EPSV-IF board (PL 11.2).
If the problem persists replace the EP accessory.
If the problem persists replace the EP-SV.