EasyManua.ls Logo

Xerox WorkCentre 7132

Xerox WorkCentre 7132
1726 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
January 2007
2-312
WorkCentre 7132
024-351, 024-354
Revision
Status-indicator-raps
024-351 IOT-ESS Communication 11 RAP
BSD-ON:3.1
The NAK that notifies of the occurrence of a transmission failure is received. (The Packet num-
ber of the received Message Packet is incorrect.)
Initial Actions
Power Off/On
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).
024-354 IOT-ESS Communication 14 RAP
BSD-ON:3.1
The NAK that notifies of the occurrence of a transmission failure is received. (A parity error was
detected by hardware of the UART.)
Initial Actions
Power Off/On
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).

Table of Contents

Other manuals for Xerox WorkCentre 7132

Related product manuals