January 2007
2-89
WorkCentre 7132
005-274, 005-275
Status-indicator-raps
Revision
005-274 Original Size Sensor Fail
DADF Document Size Detect Sensor failure detected. (At Power ON or when document setting
detected.)
Procedure
To check Original Size Sensor for paper strip being stuck. Check the connections between the
sensor and the DADF PWB. If OK, replace the Original Size Sensor. If the problem persists,
replace the DADF PWB (PL 16.3).
005-275 DADF RAM Failure RAP
BSD-ON:3.5
DADF RAM Fail. An error was detected in the DADF PWB RAM. (Checked when power is
switched on.).
Procedure
If switching the Machine OFF then ON does not resolve the problem, replace DADF PWB (PL
16.3).
To Next Page
Loading...
Need help?
General
