Xerox WorkCentre 7132 Service Documentation

January 2007
6-197
WorkCentre 7132
Test Pattern Print, Webpage Administrator Pass-
General procedures information
Reversion 4.0
NOTE: •(*1): Displays 294mmx17inch (A3 breadth x Ledger length) (means that A3 and Led-
ger are both supported sizes)
• Prints only from the specified tray. (ATS and APS are not processed.)
• If there was an invalid print specification in 1, an error occurs.
• Prints in the paper size of the selected tray. (Print areas outside the paper size will not be
printed)
• If the Finisher is installed, No Paper Run cannot be processed. No Paper Run is con-
trolled by dummy 8.5x11LEF timing regardless of whether there is paper or paper size.
• If IOT Built-in PG is specified, 2 Sided (Dup) is prohibited when specifying MSI.
(*1):Length is longer than A4 length and breadth is longer than Letter breadth.
Webpage Administrator Password
Required to change settings on machine.
User Name: (five one’s) 11111
Password: x-admin
54 Process Control 4C IOT
55 HT-Chart1-K2 4C IOT
56 HT-Chart2-K2 4C IOT
57 HT-Chart3-K2 4C IOT
58 K Grid Pattern 4C IOT
59 HT Page 4C, 4C, K, Y, C, M, R, G, B Half Tone Density Set
by Cin%
IOT
60 HT stripe and ROS
lines
4C IOT
61 Color Regi Chart
Rev. 72
4C IOT
91 Process Control 4C IOT
Table 1 Pattern Outline
No. Pattern Name
Output Color and paper size available for this
pattern
Built-in Image
Sub

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English