Xerox WorkCentre 7132

January 2007
2-104
WorkCentre 7132
005-911, 005-912
Revision
Status-indicator-raps
005-911 DADF Exit 1 Sensor Static Jam
Exit1 Sensor On detected at the timing below:
1. Power On
2. Feeder Cover Interlock Close
3. Platen Interlock Close.
Procedure
If the problem occurs frequently, make sure that there is no obstacle blocking the light path on
Exit1 Sensor. Check the connections between the Exit1 Sensor and the DADF PWB. If OK,
replace the Exit1 Sensor. If the problem persists, replace the DADF PWB (PL 16.3).
005-912 DADF Exit 2 Sensor Static Jam
Exit2 Sensor On detected at the timing below:
1. Power On
2. Feeder Cover Interlock Close
3. Platen Interlock Close.
Procedure
If the problem occurs frequently, make sure that there is no obstacle blocking the light path on
Exit2 Sensor. Check the connections between the Exit2 Sensor and the DADF PWB. If OK,
replace the Exit2 Sensor. If the problem persists, replace the DADF PWB (PL 16.3).