January 2007
2-37
WorkCentre 7132
003-755, 003-756
Status-indicator-raps
Revision
003-755 S2X Command Error RAP
There is an S2X command error.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel and rerun the job if the error did not clear after the power off/on.
003-756 Blank Originals RAP
BSD-ON:3.1/6.2
No image data was scanned from the documents.
Initial Actions
Power Off/On
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
To Next Page
Loading...
Need help?
General
