January 2007
4-17
WorkCentre 7132
REP 2.4.1
Repairs/Adjustments
Reversion 4.0
REP 2.4.1 Registration Unit
Parts List on PL 2.5
Removal
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
CAUTION
Check that “Ready to Copy” is displayed on the Control Panel display.
1. Remove the L/H Upper Cover Unit. (REP 2.6.2)
2. Remove the MSI Unit. (REP 7.1.1)
3. Disconnect the connector. (Figure 1)
Figure 1 Disconnecting the connector (1)
4. Remove the screws (2). (Figure 2)
Figure 2 Removing the screws (2)
5. Pull the outboard end of the Registration Unit toward the left of the machine and remove
the Unit. (Figure 3)
Disconnect the connector
(1)
Remove the screws (2)