EasyManua.ls Logo

Xerox WorkCentre 7132

Xerox WorkCentre 7132
1726 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
January 2007
2-311
WorkCentre 7132
024-349, 024-350
Status-indicator-raps
Revision
024-349 IOT-ESS Communication 9 RAP
BSD-ON:3.1
A transmission failure occurred as the acknowledgement could not be received after 2 resend
attempts. (After header recognition, receive interruption was detected by the IOT.)
Initial Actions
Power Off/On
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).
024-350 IOT-ESS Communication 10 RAP
BSD-ON:3.1
The NAK that notifies of the occurrence of a transmission failure is received. (The Sequencing
number of the received Message Packet is incorrect.)
Initial Actions
Power Off/On
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).

Table of Contents

Other manuals for Xerox WorkCentre 7132

Related product manuals