Xerox WorkCentre 7132

January 2007
2-764
WorkCentre 7132
116-362, 116-363
Revision
Status-indicator-raps
116-362 SSDP Software RAP
An internal shutdown occurred after an SSDP (Simple Service Discovery Protocol) processing
error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 11.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).
116-363 Print Service Software RAP
An internal shutdown occurred after an SNMP processing error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 11.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).