Xerox WorkCentre 7132 Service Documentation

January 2007
2-227
WorkCentre 7132
016-702, 016-703
Status-indicator-raps
Revision
016-701 ART EX Memory Expended RAP
Insufficient memory was detected while using the ART EX.
Initial Actions
Power Off/On
Procedure
Decrease the resolution setting.
016-702 Out of Page Buffer RAP
Insufficient Print Page Buffer is detected.
Initial Actions
Power Off/On
Procedure
Requires Print Page buffer memory expansion, a decrease of resolution, or set to Print Guar-
antee mode (Print Guarantee mode is only for PLW). For PCL, set the PCL Heap Memory/
Band Buffer Ratio to above 1:2.
Refer customer to System Administrator Guide headings
• When printing fails
• Setting Format of config.txt

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English