Xerox WorkCentre 7132 Service Documentation

January 2007
2-781
WorkCentre 7132
116-713, 116-714
Status-indicator-raps
Revision
116-713 HDD Job Full RAP
The job output was split into batches when HDD capacity was reached.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel and rerun the job.
Perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 11.2).
116-714 HP-GL/2 Command RAP
There is a command error in the HP-GL/2 (Hewlett Packard printer control language)
Initial Actions
Power Off/On
Procedure
Ask customer to cancel and rerun the job.
If the problem persists check the electrical connections on the HDD (PL 11.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 11.2).

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English