January 2007
2-56
WorkCentre 7132
005-112, 005-113
Revision
Status-indicator-raps
005-112 Belt DADF Regi Sensor On Dynamic Jam RAP
(Document Reverse)
BSD-ON:5.4
Registration Sensor does not turn On in specified time from start of original document reverse
rotation.
Procedure
When the problem occurs frequently, check if there is any area in document path that interferes
with document feed. If OK, check connectors and wiring for damage. If the problem continues,
replace Registration Sensor (PL 16.7). If the problem persists, replace the DADF PWB (PL
16.3).
005-113 Belt DADF Regi Sensor Off Dynamic Jam RAP
(Document Reverse)
BSD-ON:5.4
Registration Sensor does not turn Off in specified time from start of original document reverse
rotation.
Procedure
When the problem occurs frequently, check if there is any area in document path that interferes
with document feed. If OK, check connectors and wiring for damage. If the problem continues,
replace Registration Sensor (PL 16.7). If the problem persists, replace the DADF PWB (PL
16.3).
To Next Page
Loading...
