Xerox WorkCentre 7132

January 2007
2-767
WorkCentre 7132
116-368 , 116-370
Status-indicator-raps
Revision
116-368 Dump Print RAP
An internal shutdown occurred after a processing error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 11.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).
116-370 XJCL RAP
An internal shutdown occurred after a XJCL (X Job Control Language) processing error.
Initial Actions
Power Off/On
Procedure
Pull out and insert or replace the DIMM (PL 11.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 11.2).