Xerox WorkCentre 7132 Service Documentation

January 2007
2-308
WorkCentre 7132
024-342, 024-343
Revision
Status-indicator-raps
024-342 IOT-ESS Communication 3 RAP
BSD-ON:3.1
A transmission failure occurred, the Packet number of the sent Message Packet is incorrect.
Initial Actions
Power Off/On
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).
024-343 IOT-ESS Communication 4 RAP
BSD-ON:3.1
A transmission failure occurred, the Message Length of the sent Message Packet is incorrect.
Initial Actions
Power Off/On
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English