January 2007
2-79
WorkCentre 7132
005-153 , 005-154
Status-indicator-raps
Revision
005-153 CVT Holed Paper Pre Reg Sensor Off Jam
BSD-ON:5.4
Pre Reg Sensor does not turn Off in specified time from Pre Reg Sensor On in holed document
mode.
Procedure
Ensure that a point on circumference (farthest from trail edge), not a center, of a hole on trail
edge side is 19mm or less from trail edge.
005-154 CVT Holed Paper Out Sensor Off Jam
BSD-ON:5.4
Feed Sensor does not turn Off in specified time from Out Sensor On in holed document mode.
Procedure
Ensure that a point on circumference (farthest from trail edge), not a center, of a hole on trail
edge side is 19mm or less from trail edge.
To Next Page
Loading...
Need help?
General
