Xerox WorkCentre 7132 Service Documentation

January 2007
2-712
WorkCentre 7132
092-649, 092-650
Revision
Status-indicator-raps
092-649 ADC Shutter Open RAP
BSD-ON:9.4A
The ADC Shutter failed to open.
Procedure
Remove the Sensor Bar Assembly (PL 11.1). Check the operation of the shutter. If the shutter
cannot be repaired, replace the Sensor Bar Assembly (PL 11.1).
092-650 ADC Shutter Close RAP
BSD-ON:9.4A
The ADC Shutter failed to close.
Procedure
Remove the Sensor Bar Assembly (PL 11.1). Check the operation of the shutter. If the shutter
cannot be repaired, replace the Sensor Bar Assembly (PL 11.1).

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English