Xerox WorkCentre 7132 Service Documentation

January 2007
4-176
WorkCentre 7132
REP 16.8.2
Reversion 4.0
Repairs/Adjustments
REP 16.8.2 Staple Assembly
Parts List on PL 17.8
Removal
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
CAUTION
Check that “Ready to Copy” is displayed on the Control Panel display.
1. Remove the Front Cover Assembly. (REP 16.4.1)
2. Disconnect the connectors. (Figure 1)
1. Disconnect the connectors (x2).
Figure 1 Disconnecting the connectors
3. Remove the Staple Assembly. (Figure 2)
1. Remove the screw.
2. Remove the screw to remove the Earth Wire.
3. Remove the Staple Assembly.
Figure 2 Removing the Staple Assembly

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English