EasyManua.ls Logo

Xerox WorkCentre 7132

Xerox WorkCentre 7132
1726 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
January 2007
2-29
WorkCentre 7132
003-334, 003-335
Status-indicator-raps
Revision
003-334 IISS-ESS Communication 15 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (A framing error
was detected by hardware of the UART.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
003-335 IISS-ESS Communication 16 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (An overrun error
was detected by hardware of the UART.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).

Table of Contents

Other manuals for Xerox WorkCentre 7132

Related product manuals