Xerox WorkCentre 7132

January 2007
6-122
WorkCentre 7132
Controller & Fax NVM List
Reversion 4.0
General procedures information
790-136 Fixed Size 6 of Copy Document
Size Input
2~255 66: B4 SEF Read/
Write
ditto
790-137 Fixed Size 7 of Copy Document
Size Input
2~255 68: B5 SEF Read/
Write
ditto
790-138 Fixed Size 8 of Copy Document
Size Input
2~255 67: B5 LEF Read/
Write
ditto
790-139 Fixed Size 9 of Copy Document
Size Input
2~255 80: 11x17 SEF Read/
Write
ditto
790-140 Fixed Size 10 of Copy Docu-
ment Size Input
2~255 90: 8.5x11
SEF
Read/
Write
ditto
790-141 Fixed Size 11 of Copy Docu-
ment Size Input
2~255 89: 8.5x11 LEF Read/
Write
ditto
790-180 Default [Document Orientation]
in Copy Mode
0~1 0: Head to Top Read/
Write
0: Head to Top, 1: Head to Left
790-181 Duplex feature default setting 0~3 0: No Read/
Write
0: No (1 to 1 Sided), 1: 1 to 2 Sided, 2: 2 to 1 Sided, 3: 2 to 2 Sided
790-182 Default Collate Mode in Copy
Mode
0~2 0: Auto Read/
Write
0: Auto, 1: Collated, 2: Uncollated
790-183 Default Output Tray in Copy
Mode
0~4 0: Center Tray Read/
Write
0: Center Tray, 1: Side Tray, 2: Finisher Tray, 3: Center Tray2, 4: Top Tray *Options that are not installed
cannot be selected
790-184 FAX Sending Display Availabil-
ity
0~1 0: OFF Read/
Write
0: OFF, 1: ON
790-185 Receiver Initial Display Avail-
ability
0~1 0: OFF Read/
Write
0: OFF, 1: ON
790-186 Default Communication Mode 0~6 2: G3 Auto Read/
Write
1: G4 Auto, 2: G3 Auto, 3: International Communication (Communication Speed is below 4800bps). The
following is added in M/N, 4: G3, 5: G3 (ECM), 6: G3 (ECM) - Forced4800
790-187 Default Density (Scan Density) 0~6 3: Normal Read/
Write
0: Lighter 3, 1: Lighter 2, 2: Lighter 1, 3: Normal, 4: Darker 1, 5: Darker 2, 6: Darker 3
790-188 Default Image Quality (Docu-
ment Type)
0~2 0: Text Read/
Write
0: Text, 1: Photo, 2: Text/Photo
790-189 Default Resolution (Scan Reso-
lution)
0~3 0: Standard Read/
Write
0: Standard, 1: High Quality (200x200), 2: High Quality (400x400), 3: High Quality (600x600)
790-190 Default Monitor Print 0~1 0: OFF Read/
Write
0: OFF, 1: ON
790-192 Default Sender Records 0~1 1: ON Read/
Write
0: OFF, 1: ON
790-193 Default display starting number
of Receiver List
0~500 1 Read/
Write
1~500
790-194 Default Mixed Size 0~1 0: OFF Read/
Write
0: OFF, 1: ON
790-195 Default Receive Mode 0~1 0: Auto
Receive
Read/
Write
0: Auto Receive, 1: Manual Receive
Table 8 UI
Chain-Link NVM Name
Setup
Range Initial Value
Read/
Write Description