January 2007
6-11
WorkCentre 7132
IOT NVM List
General procedures information
Reversion 4.0
740-062 CRUM ASIC Comm Fail Information 0 0~255 RW What CRUM ASIC Comm Fail occurred:
0: No occurrence
1: WUP_REQ Busy Err
2: REQ_RX Busy Err
3: REQ_RX CRC Err
4: ATTRIB Busy Err
5: ATTRIB CRC Err
6: CSPWD Busy Err
7: CRPWD CRC Err
8: RSB Busy Err
9: RSB CRC Err
10: RMB Busy Err
11: RMB CRC Err
12: WSB Busy Err
13: WSB CRC Err
14: at I2C Write SDA Line not open
15: I2C Write No ACK
16: I2C Write No ACK
17: at I2C Read SDA Line not open
18: I2C Read No ACK
740-064 CRUM Deve Access Time Read/Write 5000 0~65535 RW Max waiting time (ms) for CRUM R/W operation (ms) at Read/Write
740-065 CRUM Deve Access Time Write 3000 0~65535 RW Waiting time (ms) before CRUM Write at Write Only
740-067 Non CRUM Drum Event 2 1~8 RW Drum CRUM event to be reported in No CRUM mode
1: CRUM disconnected
2: the same CRUM
4: old CRUM
8: new CRUM
740-068 Non CRUM Toner Y Event 2 1~8 RW Toner Y CRUM event to be reported in No CRUM mode
1: CRUM disconnected
2: the same CRUM
4: old CRUM
8: new CRUM
740-069 Non CRUM Toner M Event 2 1~8 RW Toner M CRUM event to be reported in No CRUM mode
1: CRUM disconnected
2: the same CRUM
4: old CRUM
8: new CRUM
740-070 Non CRUM Toner C Event 2 1~8 RW Toner C CRUM event to be reported in No CRUM mode
1: CRUM disconnected
2: the same CRUM
4: old CRUM
8: new CRUM
740-071 Non CRUM Toner K Event 2 1~8 RW Toner K CRUM event to be reported in No CRUM mode
1: CRUM disconnected
2: the same CRUM
4: old CRUM
8: new CRUM
Table 1 Chain 740-xxx IOT Manager
Chain-Link Name Default Range Read/Write Description
To Next Page
Loading...
Need help?
General
