Xerox WorkCentre 7132 - Page 1432

January 2007
6-109
WorkCentre 7132
Controller & Fax NVM List
General procedures information
Reversion 4.0
840-011 Brighter Setting 0~200 125:25 Read/Write 0~200: -100~100
840-012 Softer Setting 0~200 75: -25 Read/Write 0~200: -100~100
840-013 Softest Setting 0~200 50: -50 Read/Write 0~200: -100~100
840-019 RGB Color Space 0~1 0: Standard
Color Space
Read/Write 0: Standard Color Space, 1: Device Color Space
840-021 SCAN ACS Menu Display Settings 0~1 0: Do not
display
(FX), 1: Dis
-
play (AP/
MN Default)
Read/Write 0: Do not display 1: Display
840-022 Color Saturation Adjustment Default 0~4 2: Standard Read/Write 0: Stronger 2, 1: Stronger 1, 2: Standard, 3: Softer 1, 4: Softer 2
840-023 Background Color Suppression Level
Adjustment
0~4 3: Stron-
ger+1
Read/Write 0: Stronger+4, 1: Stronger+3, 2: Stronger+2, 3: Stronger+1, 4: Normal
Applicable to Full Color only
840-024 Bleed Prevention Adjustment Default 0~4 2: Standard Read/Write 0: Stronger 2, 1: Stronger 1, 2: Standard, 3: Softer 1, 4: Softer 2
840-041 ScanToPC Network Browsing Time Out
Time
1~300 5 (sec) Read/Write 1~300 (sec)
840-080 Enable Use of Remote Mail Address Book 0~1 1: Permit Read/Write 1: Permit, 0: Prohibit
840-081 LDAP Attribute Type for [Recipient Name] - cn Read/Write Text string below 32 bytes
840-082 LDAP Attribute Type for [Surname] - sn Read/Write Text string below 32 bytes
840-083 LDAP Attribute Type for [Name] - givenname Read/Write Text string below 32 bytes
840-084 LDAP Attribute Type for [Mail Address] - mail Read/Write Text string below 32 bytes
840-085 Attribute Name assigned in [Supplemen-
tary Item 1]
- Telephone
No. (FX
Default)
Read/Write Text string below 16 bytes (FX), Default text string is different depend-
ing on the designated market
840-086 LDAP Attribute Type for [Supplementary
Item 1]
- Telephone
No.
Read/Write Text string below 32 bytes
840-087 Attribute Name assigned in [Supplemen-
tary Item 2]
- Company
(FX Default)
Read/Write Text string below 16 bytes (Japan market) Default text string is differ-
ent depending on the designated market
840-088 LDAP Attribute Type for [Supplementary
Item 2]
- o Read/Write Text string below 32 bytes
840-089 Attribute Name assigned in [Supplemen-
tary Item 3]
- Company
(FX Default)
Read/Write Text string below 16 bytes (Japan market) Default text string is differ-
ent depending on the designated market
840-090 LDAP Attribute Type for [Supplementary
Item 3]
- ou Read/Write Text string below 32 bytes
840-091 Maximum Hit Count 5~100 50 Read/Write 5~100
840-092 Device User DN Name (for LDAP Authenti-
cation)
- NULL Read/Write Below 256 bytes. Do not set if LDAP Authentication is not required.
840-093 Password (for LDAP Authentication) - NULL Read/Write Below 32 bytes. Do not set if password is not required for LDAP
Authentication.
840-094 Search Root Entry DN - NULL Read/Write Below 255 bytes.
840-095 Search Range 0~3 All levels
below root
entry
Read/Write 1: Root entry only, 2: One level below root entry only, 3: All levels
below root entry
Table 5 Scan Service
Chain-Link NVM Name
Setup
Range Initial Value Read/Write Description